In some countries this may not be legally possible; if so: If you don’t wish to fine-tune your marker, which many people simply don’t, then these settings will often work perfectly fine. This will not yield good performance. The setting may be fine-tuned later on, but this will give you a good starting point to use. This work is distributed in the hope that it will be useful, but without any warranty ; without even the implied warranty of merchantability or fitness for a particular purpose. If the marker fires more than once when you pull it, your marker is bouncing and the setting should be increased. Nerves can use the same setting, even though its eye is in a different position.

Uploader: Moshakar
Date Added: 7 April 2014
File Size: 9.47 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 64869
Price: Free* [*Free Regsitration Required]

File:SFT-Loader 2009 RC2.png

A printable guide is also available see master quick-reference below. The dwell setting on your marker allows the bolt to fully cycle from shot to shot. Screw in for more pressure and out for less. In some countries this may not be legally possible; if so: Once the Shocker is fully cycling, increase the dwell another chirps millisecondsand that will be your dwell setting. Wft is useful if the marker is experiencing first shot dropoff problems known as FSDOwhere the first shot you fire is much slower in velocity sft loader 2009 the sft loader 2009.

This setting can 209 adjusted if your marker seems to add shots when you rapid fire.

SFT Loader

Gradually increase dwell until the marker begins to fully cycle. Retrieved from ” https: Views View Edit Sft loader 2009. You may use it freely according to its particular license.


From Wikimedia Commons, the free media repository. Some markers will require a higher setting than others, depending on the parts, manufacturing characteristics, weather conditions, etc etc. Loadwr reference is meant to be printable, so there isn’t enough space for detailed instructions.

If using a more modern force-feed loader newer Halo-B or Reloader-B, Dye Rotor, Virtue Spire, etca setting of bps will often work however most people can’t shoot this fast so it doesn’t matter as much for these faster hoppers. Also please note that these are only suggestions, they will work okay for most loder, but not on all.

Sft loader / Command & Conquer 4 – Defense+ / Sandbox Help – CIS

The eye sense can be set to one of two modes: You will know this time because, when the marker has trouble cycling, the sound of the bolt firing will be muffled and sound erratic, denoting ,oader. You should try to repair your dropoff issue when you have the time.

If you’re using an agitated loader, a BPS setting of will hopefully work good. I, the copyright holder of this work, release this work into the public domain. If you have an adjustable screw-in tank, set the reg as high as it will go, under psi.

File:SFT-Loader – Wikimedia Commons

Dwell can affect a number of other things, including but not limited to velocity, sft loader 2009, efficiency, and maximum lpader of fire. This is due to any number of factors which I won’t bother explaining at the moment, but it is a characteristic 209 on all switches, used for paintball guns or not. This term is often called eye sft loader 2009 on different boards however I don’t personally feel that is specific enough, so I call it eye sense instead.


Debounce is an electronic filtering timer that will tell the board how long the trigger must remain compressed before it will recognize the trigger pull as being an actual pull of the trigger. Dwell and LPR Settings: Setting ABS too high will add velocity to the first loadsr, so you would then have to turn the velocity down over the chronograph which would put you at a disadvantage.

Certain bolts work well at different pressures. If your primary reg is adjustable, set the input pressure to psi if you’re using the stock vertical Max-Flo reg.

The setting may be fine-tuned later on, but this will give you a good starting point to use. The Evolve bolt kit offers the largest pressure drop between the LPR and operating pressure however even then it’s only psi maximum. Shocker SFT reflective sft loader 2009 will require the reflective setting to function properly.

These are only starting points for further fine-tuning of the marker, which you lader do on your own I can’t tune your gun through e-mail Too low a shot count will result in the gun entering ramping sft loader 2009 too quickly, and perhaps firing one or two unwanted shots.

Nerves can use the same setting, even though its eye is in a different position.